What is a companion dimmer?
What is a companion dimmer?

How does a companion dimmer work?

The Maestro companion dimmer switch is designed to compliment a Maestro switch or a 6A or 8A Maestro wireless multi-location switch. The easy-to-operate tap switch turns lights on and off to your favorite light level or tap twice for full on. Press, hold and release the switch for delayed fade-to-off.

What is a companion switch?

The MA-AS companion switch sold here allows you to control lights (or a ceiling fan) from more than one switch in your home. Companion Switch can not be used individually. Glossy Lutron Claro light switch covers sold separately. Features.

How do you wire a Lutron companion dimmer?

1:147:02Wiring a 3 Way Dimmer with companion – YouTubeYouTubeStart of suggested clipEnd of suggested clipTake the ground wire off the existing switch and connect it to the green wire on the. Dimmer. RemoveMoreTake the ground wire off the existing switch and connect it to the green wire on the. Dimmer. Remove tagged wire from the old switch and connect it to the black colored screw on the.

Can you use 2 dimmers on a 3-way switch?

When using a 3-way dimmer switch, you should only have one dimmer on the circuit. The other switches (you can have more than one) must be on-off switches only.

What is the blue screw on Lutron dimmer?

Brass screw: Connect wire (Traveller 2 – note wire color) to this screw. 4. Blue screw: Connect wire (Traveller 1 – note wire color) to this screw. Wiring the Main Dimmer on the load-side.

Do I need two 3-way dimmers?

You will need a three-way dimmer and a three-way switch. This lets you dim from one location and turn the lights on and off from another. If only one switch controls the light, purchase a single-pole dimmer. If two switches control a single light or a group of lights, you will need a three-way dimmer.

Do you need special wiring for a dimmer switch?

Do they need special wiring to get them set up? Dimmer switches don't need special wiring at all. Single-pole dimmer switches can just replace existing single-pole light switches, and 3-way dimmers can easily replace a standard 3-way switch or be used as a single-pole switch with one wire capped off.

Can you install a dimmer switch on a light with two switches?

No, you should not have to replace both of the existing switches on each circuit. You won't be able to dim from both ends, of course. You just need a "3-Way LED Dimmer" and follow the appropriate wiring.

What is the blue screw for on a Lutron dimmer?

Brass screw: Connect wire (Traveller 2 – note wire color) to this screw. 4. Blue screw: Connect wire (Traveller 1 – note wire color) to this screw. Wiring the Main Dimmer on the load-side.

Can you use 2 dimmers on a 3 way switch?

When using a 3-way dimmer switch, you should only have one dimmer on the circuit. The other switches (you can have more than one) must be on-off switches only.

Can you replace a 3-way switch with a dimmer?

Dimmer switches can be installed on a three-way switch. This allows two controls to turn the light on and off, with a third switch left for the dimming function. Three-way switches can be used with single-pole applications when installing a dimmer switch.

Can you have 2 dimmers on a 3-way switch?

When using a 3-way dimmer switch, you should only have one dimmer on the circuit. The other switches (you can have more than one) must be on-off switches only. In this setup, the light level is controlled from a single location, whichever light switch you replace with the dimmer switch.

Why does my dimmer switch have 4 wires?

Since the switch cuts the power on and off, there will be a black wire coming into the switch and a black wire leaving. The whites are normally just connected together with a wire nut and the coppers are connected together with a wire nut or grounded to a metal junction box. So the new switch has four wires.

Can I replace a regular light switch with a dimmer?

Most dimmers are designed to fit a standard wall box opening, which makes it easy to replace the switch for any incandescent or halogen light with a dimmer. This guide will show you how to install a dimmer switch by yourself, in a relatively short amount of time.

What happens if you use a non dimmable LED with a dimmer?

Is it possible to dim them anyway? Simply, you can't dim non-dimmable LED lights. If you use non-dimmable lights in a dimmer circuit, they will either flicker or just run at full brightness. They will likely burn out faster, too.

What is the blue wire on a Lutron switch?

The ground (green or uncoated) goes to all the grounds and to the switch ground (if there is a ground screw). The blue wire is typically capped (not used) as it likely is used as a "traveler" wire for "3-way" circuits (more than one switch to operate the circuit).

What is the yellow wire on a dimmer switch?

Yellow wires are used as switch legs to ceiling fans, structural lights, and outlets paired with light switches, while blue wires are usually used as travelers for three-or-four-way switches.

Can I put a dimmer on any light switch?

A dimmer switch can be installed anywhere that an existing on or off switch is in place. Replacing the current toggle switch with a dimmer switch will allow you to change the lights' brightness, so long as you are using a light bulb that is compatible with the dimmer you have chosen.

What is the red wire for on a dimmer switch?

The dimmer switch has a ground wire, a red wire, a black wire, and a striped red wire. According to the instructions on the dimmer the black wire should be connected to power; the red wire should go out to the light; the striped red wire should just be capped; and the ground should go to the ground.

What is the Traveler wire on a dimmer switch?

The black and red wires are "travelers" and are connected to the traveler screw terminals on the two switches. This provides two alternate pathways for hot current to flow between the switches—this is what allows the switches to turn the lights on and off in a flexible manner.

Can any light fixture be made dimmable?

Common Types of Dimmable Fixtures Nearly all fixtures with standard sockets can be dimmed using incandescent or halogen bulbs. Many people use standard dimmers and controls to adjust the brightness of chandelier lighting to set the mood in the dining room.

Do LED lights need special dimmers?

Yes, LED lights require a special dimmer. An old fashioned incandescent dimmer switch will not work properly with LED bulbs. You cannot just simply lower the voltage to the LED driver.

Do all dimmers need a neutral?

If the light is off, without a neutral you won't have a complete circuit to power the smart dimmer circuitry.

What is the red wire for in a dimmer switch?

What are Red Wires? Red wires are usually used as secondary hot wires. Red wires are also hot and should be clearly marked to avoid the dangers of electrocution. Red wires are commonly used when installing ceiling fans, where the light switch maybe.

Why are there 2 black wires on light switch?

Black means hot, white signifies neutral, and green indicates ground. However, if you need to rewire a light switch or a plug socket, you may occasionally come across two black wires. It's essential that you determine which black wire is hot before proceeding.

Can I put the red and black wires together?

These wires are typically used for switch wiring as well as the interconnection between smoke detectors hard-wired into the power system. You can link two red wires together, or you can link a red wire to a black wire. Since red wires conduct current, they are considered hot.

Why does my dimmer swi
tch have 3 wires?

A 3-wire NM connects the travelers of the dimmer to the travelers of the 3-way switch. Traveler wires are interchangeable on each switch. The 3-way dimmer and 3-way switch are also interchangeable. The common terminal of the 3-way switch connects to the light fixture(s).

How do I know which wire is the traveler?

0:182:06Find the correct wiring for a 3-way switch in 2-minutes! – YouTubeYouTube

What are three types of dimmers?

Dimmers can come in many different styles, including toggles, rotaries, and touch-sensitive, as well as in a variety of colors….Most dimmers fall into these four bulb type categories:

  • Incandescent and halogen bulbs.
  • Dimmable compact fluorescent light bulbs.
  • Magnetic Low Frequency (MLV)
  • Electronic Low Frequency (ELV)

What are the two basic types of dimmers?

The two basic types of dimmers are based on how they are controlled: Mechanical and Electronic.